Resin tint quad.
Cut lap, with resin tint.
Tried it as a twin fin. I could really feel the difference in the fin placement. In a bad way!
Showing posts with label aloha to zen surfboards. Show all posts
Showing posts with label aloha to zen surfboards. Show all posts
Model 20- Jake's skeleton V.4
W.I.P
I was working from a different template on this one so I had to decide where to place the fins. I dug into the 'design library' and pulled out my best 3 performing boards. A 1978 Bob Mc Tavish shaped Sky twin fin, a 1980 Mark Richards (designed) twin fin and a 1982 Bob Hurley shaped twin fin. I measured up the fin placements and marked them out on the new board. Interesting to see the difference and the slight change in toe angle.
I took the best of all and went the average.
Jake and I are planning the next paint job already.
Model 17- Rocket Fish
5' 8" x 20 1/2" x 2 1/2".
My favourite board at the moment. What a little rocket!!
I pulled in the nose outline in a little, narrowed the tail with some flyers and cut a deeper tail swallow so it might hold on in some hollower waves.
Thick and fast!
Pigment foam stain and pigment resin on every layer including the filler coat.
Model - 14 Jake's Skeleton
This is one of the best performing models I have shaped.
Full volume under the chest, soft forgiving rails through the middle, hard biting rails through the tail.
Furtures fin boxes.
Craig Anderson riding this board on NSW mid North Coast.
Subscribe to:
Posts (Atom)